A few days ago, reports surfaced that iQOO is about to release its first tablet, the iQOO Pad. Until now, the release date or related information has not been announced.
This morning, a new Vivo device with the model number PA2373 appeared on the 3C certification website. This model number belongs to the iQOO Pad. In addition, the certification also mentions that this device is a tablet.
As mentioned in the certification, the iQOO Pad will use a 44W charger with model number V4440L0B1-CN. This charger supports the following charging modes: 10W (5V/2A), 18W (9V/2A), and 44W (11V/4A). Apart from this, there is no other information in the certification.
According to previous reports, the iQOO Pad will be a rebranded version of the Vivo Pad2, with the only difference being the chipset. The Vivo Pad2 is powered by the Dimensity 9000 chipset, while the iQOO Pad will feature the Dimensity 9000+, which is an overclocked version of the Dimensity 9000.
This chipset is manufactured using a 4nm process and has the following cores: one Cortex-X2 super core clocked at 3.2 GHz, three Cortex-A710 performance cores clocked at 2.85 GHz, and four Cortex-A510 energy-efficient cores clocked at 2.0 GHz. The GPU is Mali-G710 MC10.
In other aspects, the iQOO Pad is expected to feature a 12.1-inch LCD display with a 144Hz refresh rate and 2.8K resolution. The rear camera setup will include a 13MP main camera and a 2MP macro lens. On the front, it will have an 8MP sensor. It will come with a 10,000mAh battery and support 44W fast charging.
According to reports, the iQOO Pad is expected to be released on May 23.
